PAGE UNDER CONSTRUCTION
We were instructed by Babcock to take down their old Security Fencing (75x25 weldmesh on concrete posts set in ground with razor barb to top) , then to replace this with new 358 Mesh Security fencing, set 300mm deep in a concrete cill, with razor barb to the top - approx....
We were instructed by the client to totally replace the the Access & Automation equipment on their large (2400mm high x 8000mm wide) Cantilever Sliding Gate at their Winwick Site in Warrington.
The Gates had not worked properly for many months & the client had paid/wasted Thousands of Pounds with other Contractors who failed to diagnose & correctly repair the gate & equipment.
We completely replaced the all Access & Automation equipment to the Gate. We also made the Gate Compliant with the latest HSE Regulations, by installing 358 Mesh to the Gates to prevent finger/arm traps, together with fitting CAT3 Safety Edges to all potential Crushing points.
We were tasked with replacing the old Crowd Barrier right the pitch for Cammell Laird FC.
The job itself was tricky as we obviously could not walk on the pitch, and there was limited access for any plant or machinery & the distribution of materials
We issued the clud with a proposed Method Statement of how we intended to carry the works of, which was agreed
Being approved Contractors for Flintshire Borough Council, we were invited to tender for the Supply & installation of a Boundary Fence & Gates to cordon off the playing fields, to prevent dogs from soiling the field & preventing the children from using it
We manufactured the gates, advised on install & design of the Mesh Fence, and ultimately...